Overview of the YRC1000 robot software releases which are relevant for SRCI.
This list reflects the software releases by YEU (Yaskawa Europe GmbH).
Releases and changes which are not relevant for SRCI are not listed here.
Releases
YAS4.90
04-08-2023
- Adds support for SRCI.
- Fix for bug on 4-axis robots (e.g. PL320). This bug involved a vibrating T-axis during conveyor tracking.
Upgrade process
If you feel your system needs to be upgraded please contact YEU.
In certain cases it might be possible to do the upgrade yourself (saving time and costs of a service visit). This is judged by YEU and depends on the manipulator type, version jump and customer experience.
As new software releases often come with new parameter settings, it still
requires some changes by YEU. This is done by exchanging the
ALL.PRM
file by
email.If YEU decided you can perform the upgrade by yourself the following process applies:
Read more...
1) Warning
Upgrading/downgrading of controller- or pendant software may only be
executed by experts. Any mistake can lead to a bricked system!
2) Preparation
- [Customer] Insert a USB stick in the pendant.
- [Customer] Save a system backup (
CMOS.BIN
):
EX. MEMORY » SAVE » SYSTEM BACKUP (CMOS.BIN) - [Customer] Save the
PANELBOX.LOG
file:
EX. MEMORY » SAVE » SYSTEM DATA » CONTROLLER INFORMATION - [Customer] Zip these two files and send it to YEU by email.
- [YEU] Send the following files by file share:
- New system software.
- Current system software.
- Upgrade manual for this controller.
3) Upgrade controller system software
The following steps apply for both upgrading and downgrading.
For more detailed instructions on the following steps please see the upgrade
manual.
- [Customer] Prepare a USB stick with the new software.
- [Customer] Insert the USB stick in the pendant.
- [Customer] Update the controller system software:
Restart while pressing interlock + 8 + select - [Customer] Start the upgrade process and wait until fully completed.
- [Customer] Restart in normal mode.
- [Customer] Check if no alarms and robot working normally.
4) Upgrade pendant software (optional)
The pendant software upgrade usually not necessary. YEU will instruct
if this step is required for your system.
- [Customer] Update the pendant software:
Restart while pressing 2 + 8 + high speed - [Customer] Start the upgrade process and wait until fully completed.
- [Customer] Restart in normal mode.
- [Customer] Check if no alarms and robot working normally.
5) Update parameter settings
- [Customer] Save the
ALL.PRM
file:
EX. MEMORY » SAVE » PARAMETER » BATCH PARAMETER - [Customer] Remove the USB stick from the pendant.
- [Customer] Send this file to YEU by email.
- [YEU] Adjust
ALL.PRM
for the new system software. - [YEU] Send this file to the customer by email.
- [Customer] Copy the file to a USB stick.
- [Customer] Insert the USB stick in the pendant.
- [Customer] Load the
ALL.PRM
in normal mode:
EX. MEMORY » LOAD » PARAMETER » BATCH PARAMETER - [Customer] Restart in normal mode.
- [Customer] Check if no alarms and robot working normally.
Reverting
The current system software and the
CMOS.BIN
are the bits you need to revert
to the original situation.